CARBURETOR STRAPS

CARS KEV

ARAMID strap + Kevlar thread

  • ARAMID Carburetor safety strap for racing drag bikes
  • Blow-back carb safety (hold-on) straps for drag-bikes
  • One size fits all
  • ARAMID fire-resistant webbing
  • Brass hardware
HAND MADE IN U.S.A.
$119.00
Size
Material Color
Quantity

search
  • 35.10

Carburetor Straps

Kevlar® 1? Webbing is one of the lightest and strongest webbings available. It has a 2000 pound pound breaking strength and weighs just 3.3 grams per foot.

It has almost no stretch and doesnt absorb much water. This makes it ideal for anti-blast straps to hold carbs onto a backfiring dragbike. This webbing is extremely resistant to friction and heat and only starts to decompose at 800 degrees Fahrenheit.

Kevlar® thread is used to provide maximum strength in every area of these safety straps.

Kevlar® is effected by UV light and after 450 hours of direct sunlight it can turn brown and lose up to 50% of its breaking strength. This is important to note and this product is not ideal to be used on a permanent outdoor basis that would be receiving a lot of UV exposure from sunlight. Made in the USA

DuPont™ and Kevlar® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company.
CARS KEV
1000 Items
2021-12-24

Data sheet

Material
Performance products........36
Performance products........37
COMFORT
Non armored........58
Non armored........59
ARMOR
Textile........47
Textile........48
CATAGORY
Performane Products........21
CHANAME
Not vented........77
Not vented........78

Specific References

upc
35.10,.00,.00,.00,.00,.00,.00,.00,.00,.00,.00,.00,.00,.00
EAN13
DIAP
MPN
CARS KEV
  • Set of 3 straps = designed to hold the carburator on intake manifold in the
  • event of a BACKFIRE.. Used for Drag Racing
  • 2 straps have D-Ring pairs for holding the center-strap to frame/manifold.
  • Center strap is meant to capture the carburetor set. D-Ring sets on the
  • frame loop short straps allow for adjustability.