Leather seat with 1000 denier cordura layer for protection
Puck velcro fields - for knee pucks
Padded lower back kidney area support
Exterior side-tabs with velcro for adjustable waist
ARAMID inset in crotch area for low-bulk comfort
Expander section above knees for comfort
Expander section at back for ease of movement
3-way zipper attachment system for Vanson jackets + pants
Molded nylon hardware
Competition weight steerhide
Fully removable ventilated mesh liner
Low bulk - raw edge - hemmed pant end
Snap-closed waistband
Tapered leg to wear inside boot
Zippers at rear of calf
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
-50%
search
HIP VanTech Floating-Armor-System STANDARD.Icon indicates garment comes with VanTech CE ARMOR as standard feature.VanTech ARMOR is CE rated. Smaller shapes allow a flexible fit.. :NOTE:CE RATING is the European Community Standard for motorcycle garment armor.
RNEE VanTech F.A.S. (Floating-Armor System) STANDARDIcon indicates garment comes with VanTech CE ARMOR as standard feature.VanTech ARMOR is CE rated. Smaller shapes allow a flexible fit..F.A.S. ARMOR is designed to have controlledouter shell. This is to prevent the armor from restricting the ridersmovement while maintaining a tight fit. ::NOTE::CE RATING is the European Community Standard for motorcycle garment armor.
KNEE PUCK COMPATIBLE.Icon indicates garment comes with Velcro fields to accommodate racing kneepucks.. ::NOTE::Leather Velcro covers are available to cover the Velcro pile if not usingracing pucks.
ADJUSTABLE WAISTBANDIcon indicates garment has adjustable waistband for enhanced fit flexibilityGarments with this feature offer +/- 2 inches of adjustability at thewaist area. The exact amount will vary from style to style.This is available in both Jackets and Pants.
3-WAY WAIST ZIPPERS JACKET TO PANTS CONNECTION3 short molded nylon zippers allow a JACKET + PANT zip-together combinationwhile also allowing adjustable waistbands on either or both the pants andjacket.These zippers are set into spandex stretch panels - which have a<< stop stretch >> insert to control the amount of separation and movementbetween the jacket and the pants..The Connectors come standard with pants featuring this icon - and are alsoavailable as replacement parts.
JACKET AND PANT CONNECTING PANELS STANDARDIcon indicates garment comes with the connecting attachment system panels .standard. Panels are available as replacement parts.
STREET + TRACK COMBINATION STYLES are those that are designed to becustom-made into European style street-riding suits. There are made witha full circumference waist zipper for racing suit integrity. By combiningselected styles with different features it is possbile to create a veryflexible and purpose-focused suit. With this concept you can mix-and-matchjackets and pants to match daily conditions.
MENS STYLES AVAILABLE.This icon indicates the garment is also available in mens sizes.
WARNING: This product can expose you to chemicalssubstances and materialsknown to the State of California to cause cancer and birth defects or otherreproductive harm..ADVERTENCIA: Este producto puede exponerlo a productos quimicossubstanciasy materiales que el estado de California reconoce como causantes de cancer ydefectos de nacimiento u otros danos reproductivos..For more information: www.P65Warnings.ca.gov
DISCLAIMERVanson Motorcycle Riding Jackets and Pants DisclaimerVansons Motorcycle Riding Jackets and Pants Disclaimer - Motorcycle sportsare inherently dangerous and involve the risk of serious injury or death.Riders using these products at their own risk with full knowledge of thehazards and risks associated with their activities. Motorcycle RidingJackets and Pants cannot offer complete protection from injury or death toriders. Motorcycle Riding Jackets and Pants cannot protect areas of the bodythat are not covered and offer no protection against injuries involvingforces other than impact. CAUTION: Body Protectors (Vanson GP F.A.S. armorand CE approved armor) must fit properly and be securely fastened.
Vansons Motorcycle Armor Disclaimer - Motorcycle Sports are inherentlydangerous and involve the risk of serious injury or death. Riders usingthese products ride at their own risk with full knowledge of the hazardsand risks associated with their activities. Armor cannot offer completeprotection from injury or death to riders. Motorcycle Armor cannot protectareas of the body that are not covered and offer no protection againstinjuries involving forces other than impact.CAUTION: Body Armor Protectors (Vanson GP F.A.S. Armor and CE approvedArmor) must fit properly and be securely fastened. Armor components that aredamaged should be destroyed and replaced.
Vanson Technical SportRider Pants offer the protection of our road-racing suits together with updated ergonomic styling for a more comfortable sport-riding fit. These pants are part of a modular system of garments we call SportRiders (Styles CSR2 COB2 CAV2 etc.) and are dedicated to comfort and security for performance riding.
Made from tough competition-weight cowhide with pre-installed hip and knee VanTech CE armor (Floating Armor System US Patent 6070274), the goal is security and comfort while riding in a tucked-in position on a European-style tourer or sportbike. The racing-suit heritage is unmistakable. Specially-made Kevlar® cloth is inlayed at the crotch and runs down the legs along the inner thighs. Even the fly zipper has been set in to the front of the pants without any extra overflaps and bulk. The seat is reinforced with a 1000 denier Cordura layer on the inside for added protection with comfort and low bulk. Doubled leather is used at the knees, with both the underleg and top-of-knee areas sculpted for comfort in the riding position. The athletic mesh lining is removable to facilitate washing, changing or maintenance. Velcro fields for knee pucks are standard equipment and will accommodate the UHMW (Ultra-High-Molecular-Weight) pucks for excellent road feel without grabbing. The waistband is fully adjustable for the most comfortable fit with a built-in padded kidney support area at the rear. Lower down the legs, the fit is tapered with Kevlar® insets from behind the knee, along the calf to the ankle for a snug inside-the-boot fit. Ankle zippers are at the rear calf area for comfort and convenience.
These pants are so comfortable that many riders wear them as pants without attaching to a jacket using our exclusive three-way attachment system. For track days (you need to check with your local organization to make sure three-way pants/jacket connections are allowed) and extreme riding, the three-part jacket-to-pants attachment system allows both the pants and the jacket to have adjustable waists, so you can make fit adjustments at any time while retaining a secure jacket-to-pants connection.
Vanson Technical SportRider Pants come in men’s waist sizes 26 to 44 and women’s sizes 4 to 20. For unmatched riding comfort, performance and protection….get Technical.
DuPont™ and Kevlar® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company.
TPLS BLK
1000 Items
2023-09-06
Data sheet
Material
Pants........33
Pants and Chaps........24
CATAGORY
Womens........13
Womens Pants and Chaps
Specific References
ean13
HAND MADE IN U.S.A. OF DOMESTIC AND/OR IMPORTED MATERIALS
SIZE 10 (34 Waist) ......Adjustable Waist measures from 33 to 37 inches
Outseam is 39 ......Inseam is 28 .....Hip is 45 .........Ankle is 11
Crotch to Mid-Knee is 15in. ----- 8 long rear ankle zippers allow snug fit
Technical pants - cut with pre-curved legs + knees. Expander sections
set into leg above knee for ease of movement. Kevlar inlays at the crotch
and behind the knees extending down leg behind calf for less bulk and
ventilation. Waistband is equipped with 3-zippers and opti-panels for
jacket attachment. Velcro tabs on waistband allow 4 inches of adjustment.
BLACK REVOLUTION COMPETITION WEIGHT LEATHER Full weight 1.4 mm (3.50 to 3.75 oz) competition leather. Revolution is the leather of choice when you really need protection on or off the track. We have been making jackets and racing suits out of this leather for over 40 years. It works. And it lasts. With minimal care it lasts a long time. We repair and maintain garments over 30 years of age regularly. It is as simple as that.
BLACK FIRENZE - MEDIUM WEIGHT LEATHER ( 1.2 mm ) Selected skins are gently tumbled for extra softness and a slight pebble look. Milling brings the grain up making the natural markings a little more pronounced. Garments made of this leather will require very little breaking-in time as the leather is soft and supple right away.