All-leather elasticized waistband for snug blouson fit
Shirt-style collar with hidden snaps
2 Interior zip-close secure wallet pockets
Armor access zipper in lining to adjust or remove armor
Full leather inside facings
STREAMLINER zippers along facing - attach streamliner vest
Ventilated mesh lining
2 Front open hand pockets
ID key fob embossed with garment unit-number for reference
Windtight low-bulk zip close sleeves
2 Rear zip-close exhaust vents
Patented RamAir sleeve vent system
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
search
SHOULDER & ELBOW Floating-Armor-System READYIcon indicates that the velcro fields to accept F.A.S. Armor are present inSHOULDERS & ELBOWS
BRVI -- BACKPAD REMOVABLE VELCRO INSERTIcon indicates the BRVI to support the back pad is in place inside the coat.BRVI supports the backpad from the shoulder areas and thus the backpadhangs down the back of the garment - fully supported on both sides - in thesame manner as a backpack on a hiker. This prevents the center back of thecollar from being pulled down.. ::NOTE::The BRVI can support both the GP backpad or the VanTech CE rated backpad.
RAM A.I.R. sleeve vents are a patented design. There is usually one ventin each sleeve..Closure is by a waterproof nylon coil zipper. This design places the ventfacing forward at the inner elbow - so that when unzipped thevent bows outwards and scoops air into the sleeve and up the arm..Our unique design feature is that the open vent is bridged by a perforatedmaterial that keeps the shape of the sleeve - so the sleeve does notgrow - bag and billow in the wind. This retains the elbow protection of thesleeve in the proper location - while also allowing substancial forcedventilation up the arm to the torso of the rider.
REAR EXIT VENTS = usually two zippered vents placed in the rear of thegarment close to the underarm area..Vents are zippered closed..OR - a single rear vent across the back..Rear vents are necessary to allow air to flow from a front venting sourceover the rider and out the back so as to prevent ballooning of the garment.
WARNING: This product can expose you to chemicalssubstances and materialsknown to the State of California to cause cancer and birth defects or otherreproductive harm..ADVERTENCIA: Este producto puede exponerlo a productos quimicossubstanciasy materiales que el estado de California reconoce como causantes de cancer ydefectos de nacimiento u otros danos reproductivos..For more information: www.P65Warnings.ca.gov
DISCLAIMERVanson Motorcycle Riding Jackets and Pants DisclaimerVansons Motorcycle Riding Jackets and Pants Disclaimer - Motorcycle sportsare inherently dangerous and involve the risk of serious injury or death.Riders using these products at their own risk with full knowledge of thehazards and risks associated with their activities. Motorcycle RidingJackets and Pants cannot offer complete protection from injury or death toriders. Motorcycle Riding Jackets and Pants cannot protect areas of the bodythat are not covered and offer no protection against injuries involvingforces other than impact. CAUTION: Body Protectors (Vanson GP F.A.S. armorand CE approved armor) must fit properly and be securely fastened.
Vansons Motorcycle Armor Disclaimer - Motorcycle Sports are inherentlydangerous and involve the risk of serious injury or death. Riders usingthese products ride at their own risk with full knowledge of the hazardsand risks associated with their activities. Armor cannot offer completeprotection from injury or death to riders. Motorcycle Armor cannot protectareas of the body that are not covered and offer no protection againstinjuries involving forces other than impact.CAUTION: Body Armor Protectors (Vanson GP F.A.S. Armor and CE approvedArmor) must fit properly and be securely fastened. Armor components that aredamaged should be destroyed and replaced.
Crafted from our medium-weight Firenze leather, and inspired by the flight jackets of WW2, the Sturgis is a good-looking blouson-cut jacket, perfect for a night out.
For casual touring the Sturgis offers the patented Vanson F.A.S. ( Floating Armor System ), which mounts the CE-approved shoulder and elbow armor in a Velcro and elastic harness, allowing controlled movement inside the leather shell. It can accommodate an optional back-pad, suspended from Velcro hangers stitched into the sides of the shoulder seams like backpack straps.
Twin rear exit vents and RamAir Sleeve vents give you cooling airflow for maximum comfort on the hottest days. The patented RamAir Sleeve Vent System makes the outer shell an air scoop around the inner elbow, while the underlying structure prevents the sleeves from ballooning. Gusseted wrist zippers and an elasticized leather waistband ensure a trim fit.
Whether you’re partying at the Buffalo Chip or cruising through the Black Hills, Vanson’s Sturgis Jacket gives you the best of both worlds – casual styling with open-road functionality.
STUR FIRE
999 Items
2023-03-28
Data sheet
Material
Jackets........1
CATAGORY
Mens........1
Specific References
ean13
SPECIAL ORDER ITEM OF DOMESTIC AND/OR IMPORTED MATERIALS
BLACK FIRENZE - MEDIUM WEIGHT LEATHER ( 1.2 mm ) Selected skins are gently tumbled for extra softness and a slight pebble look. Milling brings the grain up making the natural markings a little more pronounced. Garments made of this leather will require very little breaking-in time as the leather is soft and supple right away.