Leather jacket AirCurtain + RamAir vent systems and armor
ProPerf + solid leather SportRider vented adjustable fit
Backpad optional - will accept optional backpad
CE approved armor at shoulder + elbow
Competition double leather at shoulders and elbows
Adjustable Cobra waistband using velcro pull-through tabs
Leather lined collar
Snap-back mandarin collar
3-way zipper attachment system for Vanson jackets + pants
2 Open mesh lining pockets
ProPerf and competition weight steerhide
STREAMLINER snaps for streamliner vest attachment
Ventilated mesh lining
Long leather zipper-pull
ID key fob embossed with garment unit-number for reference
Windtight low-bulk zip close sleeves
Black snaps - all parts
AirCurtain vent system - patented
Patented RamAir sleeve vent system
Leather windflap with license pocket
Black oxidized metal zippers
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
search
SHOULDER & ELBOW VanTech CE Level 2 Armor included....Icon indicates garment comes with VanTech CE ARMOR as standard feature.
BRVI -- BACKPAD REMOVABLE VELCRO INSERT....Icon indicates the BRVI to support the back pad is in place inside the coat.BRVI supports the backpad from the shoulder areas and thus the backpadhangs down the back of the garment - fully supported on both sides - in thesame manner as a backpack on a hiker. This prevents the center back of thecollar from being pulled down.. ....::NOTE::....The BRVI can support both the GP backpad or the VanTech CE rated backpad.
RAM A.I.R. sleeve vents are a patented design....There is usually one vent in each sleeve..Closure is by a waterproof nylon coil zipper. This design places the ventfacing forward at the inner elbow - so that when unzipped thevent bows outwards and scoops air into the sleeve and up the arm.....Our unique design feature is that the open vent is bridged by a perforatedmaterial that keeps the shape of the sleeve - so the sleeve does notgrow - bag and billow in the wind. This retains the elbow protection of thesleeve in the proper location - while also allowing substancial forcedventilation up the arm to the torso of the rider.
AIR CURTAIN VENT.... This is a patented vent system that allows the riderto open or close an <> stitched into the front lining panelsof the garment. This design has the outline of the vent top-stitchedthrough the outer shell.....The AirCurtain is made of waterproof coated nylon - so when closed the ventis sealed. This Air Curtain may be opened a little or a lot - making theventilation adjustable.....This design is ideal for allowing full frontal graphics without compromisingthe ventilation capabilities of the garment.
REAR EXIT VENTS....Usually two zippered vents in rear of garment close to the underarm area.....Vents are zippered closed.....OR - a single rear vent across the back.....Rear vents are necessary to allow air to flow from a front venting sourceover the rider and out the back so as to prevent ballooning of the garment.
ADJUSTABLE WAISTBAND....Icon indicates garment has adjustable waistband for enhanced fit flexibilityGarments with this feature offer +/- 2 inches of adjustability at thewaist area. The exact amount will vary from style to style.This is available in both Jackets and Pants.
3-WAY WAIST ZIPPERS JACKET TO PANTS CONNECTION....3 short molded nylon zippers allow a JACKET + PANT zip-together combinationwhile also allowing adjustable waistbands on either or both the pants andjacket....These zippers are set into spandex stretch panels - which have a<< stop stretch >> insert to control the amount of separation and movementbetween the jacket and the pants.....The Connectors come standard with pants featuring this icon - and are alsoavailable as replacement parts.
STREET + TRACK COMBINATION STYLES.... Styles that are designed to becustom-made into European style street-riding suits. There are made witha full circumference waist zipper for racing suit integrity. By combiningselected styles with different features it is possbile to create a veryflexible and purpose-focused suit. With this concept you can mix-and-matchjackets and pants to match daily conditions.
STREAMLINER COMPATIBLE....There are two possible attachments for the STREAMLINER. One type is asnap-in - the other type is zip-in. The zip-in type has two zippers alongthe center front facings of a jacket.....THE STREAMLINER is a universal insulated removeable liner. It hasremovable sleeves and lace-adjustable sides. It is reversible - with ahi-visibility safety yellow interior. Insulation is a special Tyvek materialReflective strips cross the interior - so when reversed the garment is bothhi-visibility yellow and reflective.Download the Fit Chart"
WARNING:.. This product can expose you to chemicalssubstances and materialsknown to the State of California to cause cancer and birth defects or otherreproductive harm.....ADVERTENCIA: Este producto puede exponerlo a productos quimicossubstanciasy materiales que el estado de California reconoce como causantes de cancer ydefectos de nacimiento u otros danos reproductivos.....For more information: www.P65Warnings.ca.gov
DISCLAIMER.......Vanson Motorcycle Riding Jackets and Pants Disclaimer.....Vansons Motorcycle Riding Jackets and Pants Disclaimer - Motorcycle sportsare inherently dangerous and involve the risk of serious injury or death.Riders are using these products at their own risk with full knowledge of thehazards and risks associated with their activities. Motorcycle RidingJackets and Pants cannot offer complete protection from injury or death toriders. Motorcycle Riding Jackets and Pants cannot protect areas of the bodythat are not covered and offer no protection against injuries involvingforces other than impact. CAUTION: Body Protectors (Vanson GP F.A.S. armorand CE approved armor) must fit properly and be securely fastened.
Vansons Motorcycle Armor Disclaimer.... Motorcycle Sports are inherentlydangerous and involve the risk of serious injury or death. Riders usingthese products ride at their own risk with full knowledge of the hazardsand risks associated with their activities. Armor cannot offer completeprotection from injury or death to riders. Motorcycle Armor cannot protectareas of the body that are not covered and offer no protection againstinjuries involving forces other than impact.CAUTION: Body Armor Protectors (Vanson GP F.A.S. Armor and CE approvedArmor) must fit properly and be securely fastened. Armor components that aredamaged should be destroyed and replaced.
You're a Millenial, you think everybody should get a star...No, wait, you're a real extrover - you're confident, you want to be noticed - you're OK with delivery drones mistaking you for a waypoint. Here for you is a coat with a red star big enough to see from a spacecraft. It's a contemporary interpretation of the Star jacket, with all the functionality of the Cobra - ventilation from the air-curtain front and ram-air sleeves, armor-ready, with 3-zip attachment to pants, and an adjustable suede waistband. Naturally it accepts the Streamliner vest.
A 1960's-inspired supergraphic Vanson logo adds twist and shout to the classic flat-track symbol. And just like the label on a certain quality brand of Scotch, it'll annoy those who like everything in the straight and narrow.
The Cobra Star isn't all show and surface - there are subtle structural differences too - with the big star taking the place of the shoulder seam you get a suppler, more flexible fit, a jacket you can really move around in. And that in its turn just adds to your sense of confidence.
The conceptual design brief for this project has always been that the armor is to stay in the correct position, regardless of the attitude, altitude and speed of the rider. In practice this means that the garment has to fit properly (snugly) and not expand when, for example, vents are opened.
The armor has to be imperceptible to the rider, so that the rider can move; it has to have a little give, which is why we have the patented Floating Armor System. When the ventilation is activated the airflow mustn't distort the size and shape of the garment.
All these are lessons that come out of hard-won Road Race experience.
BLACK REVOLUTION COMPETITION WEIGHT LEATHER SOLID BODY WITH PERFORATED LEATHER FRONTS Full weight 1.4 mm (3.50 to 3.75 oz) competition leather. Revolution is the leather of choice when you really need protection on or off the track. We have been making jackets and racing suits out of this leather for over 40 years. It works. And it lasts. With minimal care it lasts a long time. We repair and maintain garments over 30 years of age regularly. It is as simple as that. BLACK PERFORATED REVOLUTION COMPETITION WEIGHT LEATHER Full weight 1.4 mm competition leather is perforated to allow airflow. Perforations also make the leather softer and less firm. Revolution is the leather of choice when you really need protection and abrasion resistance. PERFORATED leather is used on the front AirCurtain Vents.