STREAMLINER zippers along facing - attach streamliner vest
Ventilated mesh lining
ID key fob embossed with garment unit-number for reference
Windtight low-bulk zip close sleeves
Black snaps - all parts
Patented RamAir sleeve vent system
Leather windflap
Black oxidized metal zippers
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
search
SHOULDER & ELBOW VanTech CE Level 2 Armor included....Icon indicates garment comes with VanTech CE ARMOR as standard feature.
BRVI -- BACKPAD REMOVABLE VELCRO INSERT....Icon indicates the BRVI to support the back pad is in place inside the coat.BRVI supports the backpad from the shoulder areas and thus the backpadhangs down the back of the garment - fully supported on both sides - in thesame manner as a backpack on a hiker. This prevents the center back of thecollar from being pulled down.. ....::NOTE::....The BRVI can support both the GP backpad or the VanTech CE rated backpad.
RAM A.I.R. sleeve vents are a patented design....There is usually one vent in each sleeve..Closure is by a waterproof nylon coil zipper. This design places the ventfacing forward at the inner elbow - so that when unzipped thevent bows outwards and scoops air into the sleeve and up the arm.....Our unique design feature is that the open vent is bridged by a perforatedmaterial that keeps the shape of the sleeve - so the sleeve does notgrow - bag and billow in the wind. This retains the elbow protection of thesleeve in the proper location - while also allowing substancial forcedventilation up the arm to the torso of the rider.
ADJUSTABLE WAISTBAND....Icon indicates garment has adjustable waistband for enhanced fit flexibilityGarments with this feature offer +/- 2 inches of adjustability at thewaist area. The exact amount will vary from style to style.This is available in both Jackets and Pants.
STREAMLINER COMPATIBLE....There are two possible attachments for the STREAMLINER. One type is asnap-in - the other type is zip-in. The zip-in type has two zippers alongthe center front facings of a jacket.....THE STREAMLINER is a universal insulated removeable liner. It hasremovable sleeves and lace-adjustable sides. It is reversible - with ahi-visibility safety yellow interior. Insulation is a special Tyvek materialReflective strips cross the interior - so when reversed the garment is bothhi-visibility yellow and reflective.Download the Fit Chart"
REFLECTIVE GARMENTS....This icon indicates garment features 3M SCOTCHLITE REFLECTIVE MATERIAL.The reflective material enhances the visibility of the wearer when ridingat night.
Concealed carry....Pockets allow a discrete and comfortable way to carry.
WARNING:.. This product can expose you to chemicalssubstances and materialsknown to the State of California to cause cancer and birth defects or otherreproductive harm.....ADVERTENCIA: Este producto puede exponerlo a productos quimicossubstanciasy materiales que el estado de California reconoce como causantes de cancer ydefectos de nacimiento u otros danos reproductivos.....For more information: www.P65Warnings.ca.gov
DISCLAIMER.......Vanson Motorcycle Riding Jackets and Pants Disclaimer.....Vansons Motorcycle Riding Jackets and Pants Disclaimer - Motorcycle sportsare inherently dangerous and involve the risk of serious injury or death.Riders are using these products at their own risk with full knowledge of thehazards and risks associated with their activities. Motorcycle RidingJackets and Pants cannot offer complete protection from injury or death toriders. Motorcycle Riding Jackets and Pants cannot protect areas of the bodythat are not covered and offer no protection against injuries involvingforces other than impact. CAUTION: Body Protectors (Vanson GP F.A.S. armorand CE approved armor) must fit properly and be securely fastened.
Vansons Motorcycle Armor Disclaimer.... Motorcycle Sports are inherentlydangerous and involve the risk of serious injury or death. Riders usingthese products ride at their own risk with full knowledge of the hazardsand risks associated with their activities. Armor cannot offer completeprotection from injury or death to riders. Motorcycle Armor cannot protectareas of the body that are not covered and offer no protection againstinjuries involving forces other than impact.CAUTION: Body Armor Protectors (Vanson GP F.A.S. Armor and CE approvedArmor) must fit properly and be securely fastened. Armor components that aredamaged should be destroyed and replaced.
Developed especially for motorcycle police, the Modesto Police Jacket features crash-protection armor at the shoulders, elbows and back. Explicitly designed to fit the rider on his bike, the body of the jacket is cut short and uses hang-down belt loops to secure the jacket to the duty belt.
These hang-down belt loops are secured with snaps to the inside-bottom facing of the jacket. A need for this design was originally expressed by the Modesto Police Department, where functional and quick holster access was required, combined with a very clean and crisp uniform look when on duty.
It gets hot in Modesto, so this design maximizes protection with good looks and at the same time reduces the bulk associated with traditional leather police jackets. To further offset the heat, we included our patented RamAir Sleeve Vent System which scoops and passes air from inside the elbow up towards the armpit area, without the sleeve billowing, or the elbow armor shifting out of position.
It can also get cold in Modesto... so there are snaps on the inside facing to accommodate the insulated Vanson Streamliner reversible vest, and a windflap behind the main zipper. For night-time riding, the 3M reflective piping across the back and down the sleeve outseams provides additional safety. The Vanson unit-number is stamped on a pen holder set onto the left front facing. Snap-down shoulder epaulets provide a handy spot to secure a radio microphone. Twin badge-holder grommets are set into a protector patch sewn onto the left chest. This is one jacket that will serve and protect for many years.
BLACK FIRENZE - MEDIUM WEIGHT LEATHER ( 1.2 mm ) Selected skins are gently tumbled for extra softness and a slight pebble look. Milling brings the grain up making the natural markings a little more pronounced. Garments made of this leather will require very little breaking-in time as the leather is soft and supple right away.