ID key fob embossed with garment unit-number for reference
Windtight low-bulk zip close sleeves
2 Rear zip-close exhaust vents
Underarm ventilation grommets
Leather windflap with license pocket
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
search
REAR EXIT VENTS--- Usually two zippered vents in rear of garment close to the underarm area. ---- Vents are zippered closed. ---- OR - a single rear vent across the back. ---- Rear vents are necessary to allow air to flow from a front venting source over the rider and out the back so as to prevent ballooning of the garment.
STREAMLINER COMPATIBLE--- There are two possible attachments for the STREAMLINER. One type is a snap-in - the other type is zip-in. The zip-in type has two zippers along the center front facings of a jacket. ---- THE STREAMLINER is a universal insulated removeable liner. It has removable sleeves and lace-adjustable sides. It is reversible - with a hi-visibility safety yellow interior. Insulation is a special Tyvek material Reflective strips cross the interior - so when reversed the garment is both hi-visibility yellow and reflective. Download the Fit Chart
WARNING:---This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. ---- ADVERTENCIA: Este producto puede exponerlo a productos quimicos y materiales que el estado de California reconoce como causantes de cancer y defectos de nacimiento u otros danos reproductivos. ---- For more information: www.P65Warnings.ca.gov
DISCLAIMER--- Vanson Motorcycle Riding Jackets and Pants Disclaimer----- Vansons Motorcycle Riding Jackets and Pants Disclaimer - Motorcycle sports are inherently dangerous and involve the risk of serious injury or death. Riders are using these products at their own risk with full knowledge of the hazards and risks associated with their activities. Motorcycle Riding Jackets and Pants cannot offer complete protection from injury or death to riders. Motorcycle Riding Jackets and Pants cannot protect areas of the body that are not covered and offer no protection against injuries involving forces other than impact. CAUTION: Body Protectors (Vanson GP F.A.S. armor and CE approved armor) must fit properly and be securely fastened. Motorcycle Riding Jacket and Pants components that are damaged should be destroyed and replaced. The protective properties of Racing suits may be compromised by prior impact- age- use and other substances. Always follow the manufacturers recommendations before applying cleaning agents- paints- or adhesives. Vanson Leathers disclaims any responsibility for injuries or death incurred while wearing any of the Motorcycle Riding Jackets and Pants offered for sale. Reprentations regarding testing results- equipment ratings- product specifications- ASTM and/or SEI standards- and the adequecy of all such standards and designations are made solely by the products manufacturer. Vanson Leathers makes no representations express or implied regarding the fitness of these products protect riders from injury or death.
The VANSON STAR JACKET is the top part of a two-piece suit for American-Flat-Track racing.
Racing flat track is one of the most exciting motorcycle racing art forms, with roots going back over 100 years. Even early machines could get going pretty fast. Stopping was a different story... that evolved over time. Board racing, Wall of Death events, beach racing, and racing on dirt tracks are all early variations of the flat track sport. Dirt tracks for harness racing were common at fairgrounds throughout America. So, what could be more natural than substituting a motorcycle for a horse and having a race? Of the many old forms of racing, flat track continues in more or less the same form.
Some things change; today the bikes are tremendously more powerful and faster, speeds of 100+ mph are normal. Some things stay the same; no front brakes, on dirt, handlebars touching, sliding around with a foot down on the track for balance... with a steel shoe on your boot to keep the sole from ripping off. Some people call this an unnecessary risk. We think of it as being heroic in a mundane world.
BLACK REVOLUTION COMPETITION WEIGHT LEATHER Full weight 1.4 mm (3.50 to 3.75 oz) competition leather. Revolution is the leather of choice when you really need protection on or off the track. We have been making jackets and racing suits out of this leather for over 40 years. It works. And it lasts. With minimal care it lasts a long time. We repair and maintain garments over 30 years of age regularly. It is as simple as that. Designed with RED bib and star with NAVY BLUE. Black + Red and White are traditional American racing colors and used for trim. Bib and star are outlined in White. Vanson logo is Vanson GOLD.